M-Series
Mc-data switches use both web and CLI, the table below displays some but not all the CLI commands.
commadelim | Toggle comma-delimited display mode |
config | configure settings |
login | login into CLI with different access rights |
maint | maintenance settings |
perf | Performance statistics |
reserved | reserved for future development |
show | display attributes |
features | configure feature settings |
ip | configure IP settings |
logout | logout of the CLI |
port | configure port data |
security | configure security settings |
snmp | configure snmp |
switch | configure switch data |
system | configure system data |
zoning | configure zoning settings |
There are several commands that allow you to navigate through the switch "..", "ctrl-U" and "root" .
Mc-data zoning commands are detailed in the below table
showactive | show actively running zoneSet |
clearzone | clear WWN's in a zone |
deletezone | remove zone from running config |
activezoneset | activation of changes |
addzone | add a new zone to the working area |
addwwnmem | add a WWN to a zone |
showpending | show pending zones |
renamezone | rename a zone |
deletewwn | delete a WWN from a zone |
renamezoneset | rename a zone set |
Zoning limits
- 64 zone sets (max)
- 2000 zones (max)
- 1024 zones per zone set (max)
- deafult should all ways be disabled (causes all port to see each other creating ghosts in a FA's login table)
---------------------------------------------------------------------------------------------------------------
To know about Cisco MDS Zoning, click the below URL
To know about Brocade Zoning, click the below URL